YOUR CURRENT POSITION: Home > Earthing & Lightning > Lightning Protection
Satellite ESE2500 pre-discharge lightning rod

Satellite ESE2500 pre-discharge lightning rod

Application Lightning is the visible discharge of static electricity within a cloud, between clouds, or between earth and a cloud. Lightning occurs in all thund
Application
Lightning is the visible discharge of static electricity within a cloud, between clouds, or between earth and a cloud. Lightning occurs in all thunderstorms. A lightning flash is composed of a series of strokes with an average of about four. The length and duration of each lightning stroke vary.
ESE Lightning Arrester captures the thunder strikes and diverts it to the earth and distribute the charges to the earth.
Features:
Early Streamer Emission (ESE) Lightning Arrester
Double Early Streamer Emission (ESE) System
ESE produces upwards emission.
High Capacity
Guaranteed Long Life
Electro Atmospheric Condenser
Atmospheric Accelerator
Bluetooth Remote Controller (optional)
Mobile App (Optional)
Remote Monitoring through web/internet/mobile app (optional)
Solar powered (optional)
 
Installation
1. Determine the lightning protection category of the building according to the area, height, number of lightning days in the location, geographical environment correction coefficient, and the nature of the building's use.
2. Use the lightning protection category and the area of ​​the building to determine the selection of one or more "satellite" lightning rods.
3. The down conductor (lower conductor) should be electrically connected to the main steel bars of the building, or two or more down conductors (lower conductors) should be made according to regulations.
4. The down conductor (lower conductor) should be disconnected and insulated on the ground nearby.
5. The grounding body, grounding resistor, and lightning protection ground network should be implemented in accordance with the requirements of the lightning protection standard GB50057-94.
 

 

Contact Us, Now.
24-hour service hotline
Contact online customer service
Add: Factory 1:No.26, Tongxiang City, Zhejiang Province,China
Factory 2:No.38,Wenzhou City, Zhejiang Province, China
Factory 3:No.45, Handan City, Hebei Province, China
Related products
bus bar fixed fixtures
MNP inside rectangular bus bar fixed fixtures
1kV Heat Shrink Termination
1kV Heat Shrink Termination
Polymer Composite Corss Arm Insulator
Polymer Composite Corss Arm Insulator
suspension clamp
Suspension Clamp